 |
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Accuracy: | +/-10mm | Frequency: | 75Khz |
|---|---|---|---|
| Material: | PBT OR FRP | Color: | Yellow |
| Selling Units: | Single Item | Single Package Size : | 29X29X25 Cm |
| Single Gross Weight: | 150 G | Package Type: | Carton |
| High Light: | Waterproof Ultrasonic Transducer,75Khz Waterproof Distance Sensor |
||
High Accuracy Ultrasonic Sensor Level Measurement With PBT OR FRP Housing
Highlights
| Ultrasonic sensor | UM4000-SR55-AU | ||
| Technical data |
|
||
| General Specifications | |||
| Sensing distance | 280…4000mm(200---3000mm) | ||
| Adjustment range | 280…4000mm | ||
| Unusable area | 0…280mm | ||
| Standard target plate | 100mm×100mm | ||
| Transducer frequency About | 75 kHz | ||
| Response delay About | 125ms | ||
| Indicators/Operating means | |||
| LED yellow | solid: NO LED flash: |
||
| LED red | flashing: | ||
| Electrical specifications |
|
||
| Operating voltage UB | 10…30VDC ripple10%ss | ||
| No-load supply current | ≤30mA | ||
| Output | |||
| Output type | 1 analogue output 0---5V | ||
| Resolution | |||
| Deviation of the characteristic curve |
±1% of full-scale value | ||
| Repeat accuracy | ±0.1% of full-scale value | ||
| Load impedance | >1k Ohm | ||
| Maximum switching current | mA | ||
| Temperature influence | ±1.5% of full-scale value | ||
| Ambient conditions | |||
| Ambient temperature | -25…70℃ | ||
| Storage temperature | -40…85℃ | ||
| Mechanical specifications |
|
||
| Protection grade | IP68 | ||
| Connection | PVC cable,4-PIN | ||
| Material | |||
| Housing | PBT OR FRP | ||
| Transducer | epoxy resin/hollow glass sphere mixture; Polyurethane foam |
1 BN=BROWN 2 GN=GREEN 3 BU=BLUE 4 BK=BLACK |
|
| Weight | 150g | ||
| Compliance with standards and Directives | |||
| Standard conformity | EN 60947-5-2:2007 | ||
|
Adjusting the evaluation limits The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. indicate whether the sensor has recognised the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -UB, A2 with +UB. Two different output functions can be set: 1. Analogue value increases with rising distance to object (rising ramp) 2. Analogue value falls with rising distance to object (falling ramp) Evaluation limits may only be specified within the first 5 minutes after Power on. To modify the evaluation limits later, the user may specify the desired values only after a new Power On.
TEACH-IN rising ramp (A2 > A1) - Position object at lower evaluation limit - TEACH-IN lower limit A1 with - UB - Position object at upper evaluation limit - TEACH-IN upper limit A2 with + UB
TEACH-IN falling ramp (A1 > A2): - Position object at lower evaluation limit - TEACH-IN lower limit A2 with + UB - Position object at upper evaluation limit - TEACH-IN upper limit A1 with - UB
Default setting A1: unusable area A2: nominal sensing range Mode of operation: rising ramp
LED Displays (SMP80 series no led)
|
Contact Person: Dream Chan
Tel: 86-755-83747109
